HUSQVARNA® VIKING® Three Hole Yarn Foot

  • $33.27
    Unit price per 
Shipping calculated at checkout.


HUSQVARNA® VIKING® Three Hole Yarn Foot

Part #413187045 (For Groups 1 - 8)

Part #920615096 (For Group 9)

 

Decorate your project with different types of decorative cords or yarn using beautiful wide HUSQVARNA VIKING® stitches and the Three Hole Yarn Foot. 

This foot will easily guide the yarn through the openings in the front of the foot back through the groove under the presser foot. The decorative yarn will be stitched over creating a beautiful braid embellishment.  

Other information

Download NEW Stitches

Click on the link below to download the new stitches. Use a file compression utility (WinZip or similar) to unzip the downloaded file. Place the unzipped files on a USB-stick. The USB-stick should contain four stitch files after a successful download.

Download stitches for the DESIGNER DIAMOND deLuxe™, DESIGNER DIAMOND™, DESIGNER RUBY™ (newer versions)

Download stitches for the DESIGNER DIAMOND deLuxe™, DESIGNER DIAMOND™, DESIGNER RUBY™ (older versions)

Download stitches for the DESIGNER™ SE

 

Three Hole Yarn Foot (Part #920615096) for Group 9 machines

Embellish your project with different types of decorative cords or yarn using beautiful HUSQVARNA® VIKING® 9 mm stitches and the Three Hole Yarn Foot. This foot will easily guide the cords or yarn through the openings in the front of the foot back through the groove under the presser foot. The decorative cords or yarn will be stitched over creating a beautiful braid embellishment.
1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin.
2. Select a 9 mm decorative stitch. Note: Decorative stitches that use forward motion work best (Avoid stitches with too much backward motion.)
3. Thread decorative cords or yarn into the holes from the top of the foot, using the Yarn Threader, prior to attaching the foot onto the sewing machine.
4. Make sure the cords or yarn slide easily through the openings. (If the yarn is too thick it will create too much tension and the feeding might be affected.)
5. Snap on the Three Hole Yarn Foot.
6. Engage IDF(TM) system (920615096 only).
7. Place the threaded cords or yarn under the presser foot with a 5 cm (2”) tail.
8. Place a tear away stabilizer underneath the fabric and place your fabric under the presser foot.
9. Sew carefully, not too fast. If your machine has a speed control reduce the sewing speed to easily guide the fabric and yarn as you sew.


We Also Recommend