Husqvarna Viking Interchangeable Dual Feed Foot (walking foot) (one sole only)
Husqvarna Viking Interchangeable Dual Feed
(note: This is the same foot as the Husqvarna Viking Interchangeable Dual Feed foot that comes with 2 different soles and an attachable guide. However, this foot only comes with one sole and no attachable guide but still will fit the different soles/feet that are sold separately for the Interchangeable dual feed foot).
Item #68001172
(Fits groups 5, 6, 7 machines)
The Dual Feed Foot with changeable presser feet is designed to feed layers of fabric and/or batting evenly. It is perfect for quilting, sewing velvet, stretch fabrics, imitation leathers and fabrics need precise pattern matching. Snap on the Changeable Straight Stitch Foot. Select the center needle straight stitch. Adjust it up to a maximum stitch length of 6. Snap on the Changeable Zigzag Foot and select stitches up to a maximum of 7mm wide and 6mm and long.
Changeable Presser feet are also available and are listed separately for sale.
Other information
1. Remove the presser foot ankle by unscrewing the ankle screw.
2. Place the Duel Feed Foot onto your machine from the back, positioning the fork over the needle clamp screw. Screw the Dual Feed Foot onto the presser foot bar with the presser foot ankle screw. Reduce presser foot pressure to 3.
Snap-on and remove the changeable presser foot
3. With presser foot bar in the up position, place the presser foot under the Dual Feed Foot.
4. Push the changeable foot upwards so that it snaps into place.
5. To remove the changeable foot, push the front of the foot upwards until the foot snaps off.